ALLEN & HEATH QU-3D

The steel tablet bracket screws into the rear of your Qu – perfect for using an iOS or Android device running Qu MixPad to extend touchscreen control and visual feedback.

ALLEN & HEATH Dustcover QU-3 / QU-3D - eine Schtaubschutzhülle für dein Allen & Heath QU-3 oder QU-3D

A&H Carrybag QU-3 / QU-3D eine Praktische Transporttasche für ein Allen & Heath QU-3 oder ein QU-3D

ALLEN & HEATH 19“ Rackmount Kit QU-3 / QU-3D - Zur montage deines ALLEN & HEATH QU-3 oder QU-3D in einem 19" Rack.

The DT168 is a rugged, 96kHz portable expander for adding remote I/O to a Dante equipped dLive, Avantis, SQ, Qu, or AHM system.16 Mic Preamps+60dB of gain, Phantom Power indicators and -20dB pad for line level sources.8 Line OutsBalanced, relay protected line outputs on XLR.On Stage or In The RackStagebox format with optional rackmount kit available.96kHz Dante SupportChoose between standard 48kHz operation and high-fidelity 96kHz operation.Roadworthy Dante ExpansionThe DT168 provides 16 microphone preamps and 8 line outputs in a convenient stagebox form factor. Ideal for portable applications thanks to its rubber bumpers and handle, it can be deployed on stage or used as a drop-in expander in any Qu, SQ, Avantis, AHM, or dLive Dante network.Up to 32 units can be added to a Dante-equipped AHM, Qu, SQ, Avantis or dLive system.Get the Best Out of Your Dante NetworkThe quality of your Dante audio is only as good as the quality of your Dante I/O.DT168 offers the acclaimed Allen & Heath preamps, partnered with 96kHz converters, for best-in-class sound quality over Dante, plus Primary and Secondary ports for daisy-chain or redundancy through secure EtherCon connectors.Ready for the StageThe Expander’s rugged design, with hard-wearing rubber bumpers, allows it to be placed directly on the stage floor during performances. Weighing in at just 4.8kg and featuring a sturdy carry handle, the DT168 offers the convenience and portability needed in rental, education, houses of worship and many other environments. An optional 4U rack mounting kit is available which allows installation in 19-inch racks.DT Preamp ControlDT Preamp Control is a Windows / macOS application that allows remote control of multiple DT168 or DT164-W Dante expanders. Control of analogue gain, phantom power and Pad is provided per socket. The socket names are also displayed and can be edited in Dante Controller.DT Preamp Control extends the applications of the DT168 and DT164-W expanders, not limited to Allen & Heath mixing systems or matrix processors. These include large distributed audio networks in venues, stadia and educational campuses, where high-channel count Dante I/O is required in multiple locations.DT168 CompatibilityUp to 32 DT168 expanders can be added to an AHM, SQ, Avantis or dLive system when equipped with an SQ Dante or dLive 96kHz Dante card, or directly to a Dante-equipped Qu mixer. The DT168 can also be used on Dante-equipped 3rd-party mixers in conjunction with the DT Preamp Control software.

DX012 provides remote output expansion for Qu*, SQ, Avantis and dLive mixers, and for AHM audio matrix processors.12 XLR OutsFlexible switching options between balanced, relay protected analogue and stereo AES digital on outputs 5-12.AES CompatibleAES outputs globally switchable between 44.1kHz,48kHz, 88.2kHz or 96kHz.Redundant & Cascade ModesRedundant mode supports dual-cable connection to compatible hardware. Cascade mode allows daisy-chaining of up to 2 DX Expanders on each DX port.Plug-and-PlayNo configuration required, just connect to your mixer and you’re ready to go. Firmware updates are handled automatically by the mixer.Need to get more out of your system?Perfect for feeding IEM systems and amplifier racks, DX012 offers both analogue and AES digital output options in a compact 1U form factor.Put It Where You Need ItThe DX012 can be placed up to 100m away from the mixer for maximum flexibility of positioning and features integrated rack-ears for mounting in a 1U 19″ space. The expander connects via a single Cat5e cable to the mixer or upstream DX Expander via a secure EtherCon port. A second locking EtherCon port is provided for redundant connection to compatible hardware, or for daisy-chaining to a downstream DX Expander for additional remote I/O.Flexible Output OptionsThe DX012 provides 12 XLR outputs, with three configuration options:12 analogue line outputs8 analogue line outputs + 4 stereo AES outputs4 analogue line outputs + 8 stereo AES outputs*96kHz Qu models only

The DX168 is a rugged, 96kHz portable expander for adding remote I/O to a dLive, Avantis, SQ, or Qu* system, or to AHM audio matrix processors.16 Mic Preamps+60dB of gain, Phantom Power indicators and -20dB pad for line level sources.8 Line OutsBalanced, relay protected line outputs on XLR.On Stage or In The RackRugged stagebox format with optional rackmount kit available.Plug-and-PlayNo configuration required, just connect to your mixer and you’re ready to go. Firmware updates are handled automatically by the mixer.Ready for the StageThe Expander’s rugged design, with hard-wearing rubber bumpers, allows it to be placed directly on the stage floor during performances. Weighing in at just 4.8kg and featuring a sturdy carry handle, the DX168 offers the convenience and portability needed in rental, education, houses of worship and many other environments. An optional 4U rack mounting kit is available which allows installation in 19-inch racks.Put It Where You Need ItThe DX168 can be placed up to 100m away from the mixer for maximum flexibility of positioning. The expander connects via a single Cat5e cable to the mixer or upstream DX Expander via a secure EtherCon port. A second locking EtherCon port is provided for redundant connection to compatible hardware, or for daisy-chaining to a downstream DX Expander for additional remote I/O.*96kHz Qu models only

The DX164-W is a wall mountable expander that adds remote I/O to a dLive, Avantis, SQ and Qu* mixers, or to AHM audio matrix processors.16 Mic Preamps+60dB of gain, Phantom Power indicators and -20dB pad for line level sources.4 Line OutsBalanced, relay protected line outputs on XLR.Redundant and Cascade ModesRedundant mode supports dual-cable connection to compatible hardware. Cascade mode allows daisy-chaining of up to 2 DX Expanders on each DX port.Plug-and-PlayNo configuration required, just connect to your mixer and you’re ready to go. Firmware updates are handled automatically by the mixer.Wall or Floor MountThe reversible mounting frame allows for in-wall or on-wall mounting. With custom brackets, the unit can be fitted in a standard NEMA box, or mounted in a floor pocket for stage use.Put It Where You Need ItThe DX164-W can be placed up to 100m away from the mixer for maximum flexibility of positioning. The expander connects via a single Cat5e cable to the mixer or upstream DX Expander via a secure EtherCon port. A second locking EtherCon port is provided for redundant connection to compatible hardware, or for daisy-chaining to a downstream DX Expander for additional remote I/O.Flexible Power OptionsThe IEC mains power inlet can be replaced with a gland module and screw terminals for fixed installation, and a DC 12V backup input is also provided.*96kHz Qu models only

Der ALLEN & HEATH DX Hub ist ein professioneller Audio-Expander-Hub zur Erweiterung kompatibler ALLEN & HEATH Digitalmischpult- und Audio-Matrix-Systeme. Er ermöglicht die zentrale Anbindung mehrerer DX-Expander über eine einzige Netzwerkverbindung zum Mischpult und eignet sich damit besonders für umfangreiche Live-, Touring- und Festinstallationen.Der DX Hub verfügt über vier DX Link Ports, die jeweils 32 × 32 Audiokanäle mit einer Abtastrate von 96 kHz übertragen. An jeden DX-Port kann ein DX32 oder eine Kaskade aus bis zu zwei kompatiblen DX-Expandern angeschlossen werden. Insgesamt lassen sich damit bis zu acht DX168, DX164-W, DX012 oder DX88 Expander über einen DX Hub betreiben.Die Verbindung zum Mischpult bzw. Audiosystem erfolgt über die integrierte gigaACE-Schnittstelle. Diese überträgt bis zu 128 × 128 Audiokanäle bei 96 kHz über eine einzige Netzwerkleitung. Dadurch lässt sich die Verkabelung insbesondere bei größeren Bühnen-, Veranstaltungs- und Installationssystemen erheblich vereinfachen.Der DX Hub ist mit ALLEN & HEATH SQ, Avantis, AHM sowie den aktuellen 96-kHz-Qu-Systemen über SLink kompatibel. In einem dLive-System erfolgt die Anbindung über eine entsprechende gigaACE I/O-Karte. Bei dLive können zwei DX Hubs außerdem für eine redundante Dual-Cable-Verbindung eingesetzt werden.Hersteller: ALLEN & HEATHModell: DX HubProduktart: Digitaler Audio-Expander-HubDX-Anschlüsse: 4 × DX LinkKanäle je DX-Port: 32 × 32Gesamtkapazität: 128 × 128 KanäleAbtastrate: 96 kHzSystemanschluss: gigaACEKompatible Expander: DX168, DX164-W, DX012, DX32 und DX88Max. Anzahl DX-Expander: bis zu 8 Stück, abhängig vom ExpandertypMaximale Kabellänge: bis 100 m je Verbindung mit geeigneter Cat5e-STP-VerkabelungRedundanter Betrieb: möglich mit dLiveKompatible Systeme: ALLEN & HEATH dLive, Avantis, SQ, AHM und 96-kHz-Qu-SystemeStromversorgung: internes Universalnetzteil, 100–240 V AC, 50/60 HzRackmontage: optional, bis zu 2 DX Hubs auf 1 HERackmount-Kit: FULLU-RK19X, optional erhältlichDer ALLEN & HEATH DX Hub ist die ideale Lösung für größere digitale Audiosysteme, bei denen zahlreiche Ein- und Ausgänge dezentral auf Bühne, in Technikräumen oder an verschiedenen Positionen einer Installation benötigt werden.Lieferumfang: 1 × ALLEN & HEATH DX Hub.

DT164-W provides 16 microphone preamps and 4 line outputs in a versatile wall-mount design for permanent installation.16 Mic Preamps+60dB of gain, Phantom Power indicators and -20dB pad for line level sources.4 Line OutsBalanced, relay protected line outputs on XLR.Wall or Floor MountDesigned for fixed installation in or on walls, or in floor traps.96kHz Dante SupportChoose between standard 48kHz operation and high-fidelity 96kHz operation.Wall or Floor MountThe reversible mounting frame allows for in-wall or on-wall mounting. With custom brackets, the unit can be fitted in a standard NEMA box, or mounted in a floor pocket for stage use.Flexible Power OptionsThe IEC mains power inlet can be replaced with a gland module and screw terminals for fixed installation, and a DC 12V backup input is also provided.

The compact and portable DT02 converts two channels of Dante audio to a pair of XLR line-outputs, enabling simple break-out to analogue equipped hardware for install and live applications.2 Line OutsBalanced, relay protected line outputs on XLR.AES67 CompatibleInteroperability with other AES67 devices on the same network.DDM ReadyDante Domain Manager offers security, organization, scalability, and control for Dante networks.96kHz Dante SupportChoose between standard 48kHz operation and high-fidelity 96kHz operation.Easily Add Line Outputs to a Dante NetworkDT02 is a cost-effective, compact 48kHz/96kHz Dante interface enabling 2x XLR outputs wherever you need them on your Dante network. Ideal for a wide variety of fixed installation and AV hire / portable applications, DT02 can be used with any Dante-equipped Allen & Heath mixer or AHM system, as well as with third party Dante systems.PoE or PSUThe unit can be PoE powered or powered via a DC 12V supply. Two versions are available, the standard DT02 with power supply and rubber feet, or the DT02-M which includes surface mounting ears (and no power supply).Surface MountThanks to its compact format, DT02 can be easily mounted in the proximity of powered speakers or monitors. The DT02-M version ships with surface mounting ears for visually unobtrusive installation.Rack Mount KitAn optional rack mount kit is available for installation of up to two DT units in a 1U 19″ slot in the equipment rack.DT02 CompatibilityThe DT02 is compatible with any of our digital mixers that can be fitted with a Dante card. It is also compatible with Dante equipped 3rd party hardware.

DT20 is a compact 48kHz/96kHz Dante interface enabling convenient placement of 2 mic/line inputs wherever you need to get analogue audio into a Dante network.2 Mic/Line InputsPair of combi mic/line inputs with local gain control and +48V phantom power with LED indicator.AES67 CompatibleInteroperability with other AES67 devices on the same network.DDM ReadyDante Domain Manager offers security, organization, scalability, and control for Dante networks.96kHz Dante SupportChoose between standard 48kHz operation and high-fidelity 96kHz operation.Easily Add Line Inputs to a Dante NetworkIdeal for both fixed installation and AV hire / live applications, DT20 can be used with any Dante-equipped Allen & Heath mixer or AHM system, as well as in third party Dante systems.PoE or PSUThe unit can be PoE powered or powered via a DC 12V supply. Two versions are available: the standard DT20 with power supply and rubber feet, or the DT20-M which includes surface mounting ears (and no power supply).Surface MountThanks to its compact format, DT20 can be easily mounted under a table, podium etc. for local mic connection. The DT20-M version ships with surface mounting ears for visually unobtrusive installation.Rack Mount KitAn optional rack mount kit is available for installation of up to two DT units in a 1U 19″ slot onstage or at FOH.DT20 CompatibilityThe DT20 is compatible with any of our digital mixers that can be fitted with a Dante card. It is also compatible with Dante equipped 3rd party hardware.

The compact and portable DT22 enables simple integration of Phoenix / Euroblock equipped hardware into a Dante network. Two inputs and two outputs make it suitable for a range of fixed install scenarios.2 Line Ins + OutsPair of mic/line inputs with local gain control and +48V phantom power, and two line outputs, all on Phoenix/Euroblock connectors.AES67 CompatibleInteroperability with other AES67 devices on the same network.DDM ReadyDante Domain Manager offers security, organization, scalability, and control for Dante networks.96kHz Dante SupportChoose between standard 48kHz operation and high-fidelity 96kHz operation.Easily Add Phoenix / Euroblock Inputs and Outputs to a Dante NetworkDT22 is a compact 48kHz/96kHz Dante interface enabling convenient placement of 2 mic/line inputs and 2 line outputs – via standard Phoenix / Euroblock connectors – wherever you need to get analogue audio in and out of a Dante network.PoE or PSUIt can be used with any Dante-equipped Allen & Heath mixer or AHM system, as well as in third party Dante systems. The unit can be PoE powered or powered via a DC 12V supply.Surface MountDT22 is designed for fixed installation and can be easily mounted under a meeting table, for example in a breakout room or huddle space, or mounted under a podium for local mic/PC and speaker connection. Surface mount ears are included with the DT22.Rack Mount KitAn optional rack mount kit is available for installation of up to two DT22 units in a 1U 19″ slot to interface with analogue equipment such as an AV switcher.DT22 CompatibilityThe DT22 is compatible with any of our digital mixers that can be fitted with a Dante card. It is also compatible with Dante equipped 3rd party hardware.

The compact and portable DT02 converts two channels of Dante audio to a pair of XLR line-outputs, enabling simple break-out to analogue equipped hardware for install and live applications.2 Line OutsBalanced, relay protected line outputs on XLR.AES67 CompatibleInteroperability with other AES67 devices on the same network.DDM ReadyDante Domain Manager offers security, organization, scalability, and control for Dante networks.96kHz Dante SupportChoose between standard 48kHz operation and high-fidelity 96kHz operation.Easily Add Line Outputs to a Dante NetworkDT02 is a cost-effective, compact 48kHz/96kHz Dante interface enabling 2x XLR outputs wherever you need them on your Dante network. Ideal for a wide variety of fixed installation and AV hire / portable applications, DT02 can be used with any Dante-equipped Allen & Heath mixer or AHM system, as well as with third party Dante systems.PoE or PSUThe unit can be PoE powered or powered via a DC 12V supply. Two versions are available, the standard DT02 with power supply and rubber feet, or the DT02-M which includes surface mounting ears (and no power supply).Surface MountThanks to its compact format, DT02 can be easily mounted in the proximity of powered speakers or monitors. The DT02-M version ships with surface mounting ears for visually unobtrusive installation.Rack Mount KitAn optional rack mount kit is available for installation of up to two DT units in a 1U 19″ slot in the equipment rack.DT02 CompatibilityThe DT02 is compatible with any of our digital mixers that can be fitted with a Dante card. It is also compatible with Dante equipped 3rd party hardware.