A basic single sheave pulley ready to accept any of our range of fixings. To order pulleys please state part numbers of: 1. Basic Pulley required 2. Fixing System required ie. T42931 + T42984 = 100mm Single Pulley (for Rope) fitted with Awning Brackets. The recommended sizes and for Hand Ropes & Wires are: 100mm Diameter Sheave - 12mm Rope – 4mm Wire 150mm Diameter Sheave - 18mm Rope – 6mm Wire 200mm Diameter Sheave - 18mm Rope – 6mm Wire
A basic single sheave pulley ready to accept any of our range of fixings. To order pulleys please state part numbers of: 1. Basic Pulley required 2. Fixing System required ie. T42931 + T42984 = 100mm Single Pulley (for Rope) fitted with Awning Brackets. The recommended sizes and for Hand Ropes & Wires are: 100mm Diameter Sheave - 12mm Rope – 4mm Wire 150mm Diameter Sheave - 18mm Rope – 6mm Wire 200mm Diameter Sheave - 18mm Rope – 6mm Wire
Six Track straight sections are the basis of any straight tracking system. Available in lengths from 0.25m - 3.0m as standard with special lengths available on request these straight sections can be used to span any distance. Six Track straight sections are supplied pre-drilled to accept our range of components. The standard finish is Black Powder Paint. Doughty Engineering recommend a maximum single track length of 10 metres and a maximum overlapped track length of 18 metres.
Six Track straight sections are the basis of any straight tracking system. Available in lengths from 0.25m - 3.0m as standard with special lengths available on request these straight sections can be used to span any distance. Six Track straight sections are supplied pre-drilled to accept our range of components. The standard finish is Black Powder Paint. Doughty Engineering recommend a maximum single track length of 10 metres and a maximum overlapped track length of 18 metres.
Six Track straight sections are the basis of any straight tracking system. Available in lengths from 0.25m - 3.0m as standard with special lengths available on request these straight sections can be used to span any distance. Six Track straight sections are supplied pre-drilled to accept our range of components. The standard finish is Black Powder Paint. Doughty Engineering recommend a maximum single track length of 10 metres and a maximum overlapped track length of 18 metres.
Six Track straight sections are the basis of any straight tracking system. Available in lengths from 0.25m - 3.0m as standard with special lengths available on request these straight sections can be used to span any distance. Six Track straight sections are supplied pre-drilled to accept our range of components. The standard finish is Black Powder Paint. Doughty Engineering recommend a maximum single track length of 10 metres and a maximum overlapped track length of 18 metres.
Six Track curved sections are the basis of any curved tracking system.Available with a radius of 0.50m – 3.0m as standard with special curves available on request these curved sections can be used to create any shape encountered.Six Track curved sections are supplied pre-drilled to accept our range of components.The standard finish is Black Powder Paint.
Six Track curved sections are the basis of any curved tracking system.Available with a radius of 0.50m – 3.0m as standard with special curves available on request these curved sections can be used to create any shape encountered.Six Track curved sections are supplied pre-drilled to accept our range of components.The standard finish is Black Powder Paint.
Moulded in Acetyl the Sixtrack Spigot Plate has been designed to aid track installation and aligment. The Spigot Plate simply fits between each track joint locating the top and bottom rails ensuring they are perfectly aligned to provide a smooth running track system. Each section of straight track is supplied with a Spigot Plate as standard.
Six Track is suspended from its top rail using Adjustable Support Brackets and M12 Studding. Up to 100mm of adjustment can be achieved by using the Adjustable Support Bracket and two Lock Nuts on M12 Studding. In confined spaces the Short Support Brackets should be used. The Short Support Bracket offers minimal adjustment. Maximum span between supports with an open cloth is 2.25m. Maximum span between end supports with a bunched cloth is 1.60m.
Six Track is suspended from its top rail using Adjustable Support Brackets and M12 Studding. Up to 100mm of adjustment can be achieved by using the Adjustable Support Bracket and two Lock Nuts on M12 Studding. In confined spaces the Short Support Brackets should be used. The Short Support Bracket offers minimal adjustment. Maximum span between supports with an open cloth is 2.25m. Maximum span between end supports with a bunched cloth is 1.60m.
Six Track is suspended from its top rail using Adjustable Support Brackets and M12 Studding. Up to 100mm of adjustment can be achieved by using the Adjustable Support Bracket and two Lock Nuts on M12 Studding. In confined spaces the Short Support Brackets should be used. The Short Support Bracket offers minimal adjustment. Maximum span between supports with an open cloth is 2.25m. Maximum span between end supports with a bunched cloth is 1.60m.
To create an overlap with the Six Track system Two Overlap Brackets are required. This Overlap Bracket use the same M12 studding for fixing as per the Support Brackets. The Standard Overlap of a system is 1.0 metre. Fixing Hole: 13mm Tube Ctrs: 85mm Finish: Black Powder Paint
Specially designed to enable you to hang overlap tracks from standard scaffolding bars, 48.3mm. Each Clamp is fitted with a protection plate to prevent damage to the top tube of the track.
The Six Track Line Support provides support for sagging hauling lines or lines spanning a large distance. Doughty Engineering recommends that pre-stretched polyester cord is used to minimise lines sagging. Material: Steel Finish: Black Powder Paint
The Return Pulley is used to return a hauling line at the end of a track run. This Pulley can be mounted either left of right handed. As with all the Doughty Six Track components this Pulley bolts straight to the existing holes in the end of a Six Track section. Pulley: Nylon Bracket: Steel Finish: Black Powder Paint
Single and Twin Head Pulleys are used to direct hauling lines up to 90 degrees away from the track. Head Pulleys can be mounted either left of right handed. As with all the Doughty Six Track components this Pulley bolts straight to the existing holes in the end of a Six Track section. Pulley: Nylon Bracket: Steel Finish: Black Powder Paint
Sixtrack Guide Pulleys are used to prevent the hauling lines sagging and chaffing. Twin Guide Pulleys should be fitted at 2.5m centres on straight sections. Single Pulleys should be fitted where required on curved sections. Pulley: Nylon Bracket: Steel Finish: Black Powder Paint
