Avantis UltraHardware:Two 15.6” Full HD touchscreens24 assignable SoftKeys24 faders, 6 layers12 Analog/1 stereo AES Inputs12 Analog/2 stereo AES Outputs2 I/O Ports (128×128)Mix Engine:96 Input Channels56 Busses24 Dyn8DEEP Preamp, Compressor & Expander ModelsNEQ128 RackUltra FX12 RackExtra FXAvantis is a 64 channel / 42 configurable bus mixer platform, expandable to 96 channel / 56 configurable bus, featuring our 96kHz XCVI FPGA engine with class-leading 0.7ms latency plus add-on processing and effects from our flagship dLive mixing system.

AvantisHardware:• Two 15.6” Full HD touchscreens• 24 assignable SoftKeys• 24 faders, 6 layers• 12 Analog/1 stereo AES Inputs• 12 Analog/2 stereo AES Outputs• 2 I/O Ports (128×128)Mix Engine:• 64 Input Channels• 42 Busses• 12 RackExtra FX

Avantis Solo UltraHardware:15.6” Full HD touchscreen 18 assignable SoftKeys 12 faders, 6 layers 6 Analog/1 stereo AES Inputs 6 Analog/1 stereo AES Outputs 2 I/O Ports (128×128)Mix Engine:96 Input Channels56 Busses24 Dyn8DEEP Preamp, Compressor & Expander ModelsNEQ128 RackUltra FX12 RackExtra FXAvantis is a 64 channel / 42 configurable bus mixer platform, expandable to 96 channel / 56 configurable bus, featuring our 96kHz XCVI FPGA engine with class-leading 0.7ms latency plus add-on processing and effects from our flagship dLive mixing system.

Avantis SoloHardware:• 15.6” Full HD touchscreen• 18 assignable SoftKeys• 12 faders, 6 layers• 6 Analog/1 stereo AES Inputs• 6 Analog/1 stereo AES Outputs• 2 I/O Ports (128×128)Mix Engine:• 64 Input Channels• 42 Busses• 12 RackExtra FX

GX4816 is a 96kHz audio expander that provides high-input-count remote expansion for Qu*, SQ, Avantis and dLive mixing systems, and for AHM audio matrix processors.48 Mic Preamps+60dB of gain, Phantom Power indicators and -20dB pad for line level sources.16 Line OutsBalanced, relay protected line outputs on XLR.DX PortsA pair of DX ports enable connection of additional DX expanders or the ME Personal Monitoring System (not on dLive or AHM)Plug-and-PlayNo configuration required, just connect to your mixer and you’re ready to go. Firmware updates are handled automatically by the mixer.Massively Expand Your System I/O!Each GX4816 is loaded with 48 dLive mic preamps with independent Phantom Power LED indicators, plus 16 XLR line outputs. Additionally, 2 DX ports are provided for connection to up to 4 DX Expanders for further I/O expansion.Put It Where You Need ItThe GX4816 can be placed up to 100m away from the mixer for maximum flexibility of positioning and features integrated rack-ears for mounting in a 5U 19″ space.*96kHz Qu models only

DT164-W provides 16 microphone preamps and 4 line outputs in a versatile wall-mount design for permanent installation.16 Mic Preamps+60dB of gain, Phantom Power indicators and -20dB pad for line level sources.4 Line OutsBalanced, relay protected line outputs on XLR.Wall or Floor MountDesigned for fixed installation in or on walls, or in floor traps.96kHz Dante SupportChoose between standard 48kHz operation and high-fidelity 96kHz operation.Wall or Floor MountThe reversible mounting frame allows for in-wall or on-wall mounting. With custom brackets, the unit can be fitted in a standard NEMA box, or mounted in a floor pocket for stage use.Flexible Power OptionsThe IEC mains power inlet can be replaced with a gland module and screw terminals for fixed installation, and a DC 12V backup input is also provided.

The DX164-W is a wall mountable expander that adds remote I/O to a dLive, Avantis, SQ and Qu* mixers, or to AHM audio matrix processors.16 Mic Preamps+60dB of gain, Phantom Power indicators and -20dB pad for line level sources.4 Line OutsBalanced, relay protected line outputs on XLR.Redundant and Cascade ModesRedundant mode supports dual-cable connection to compatible hardware. Cascade mode allows daisy-chaining of up to 2 DX Expanders on each DX port.Plug-and-PlayNo configuration required, just connect to your mixer and you’re ready to go. Firmware updates are handled automatically by the mixer.Wall or Floor MountThe reversible mounting frame allows for in-wall or on-wall mounting. With custom brackets, the unit can be fitted in a standard NEMA box, or mounted in a floor pocket for stage use.Put It Where You Need ItThe DX164-W can be placed up to 100m away from the mixer for maximum flexibility of positioning. The expander connects via a single Cat5e cable to the mixer or upstream DX Expander via a secure EtherCon port. A second locking EtherCon port is provided for redundant connection to compatible hardware, or for daisy-chaining to a downstream DX Expander for additional remote I/O.Flexible Power OptionsThe IEC mains power inlet can be replaced with a gland module and screw terminals for fixed installation, and a DC 12V backup input is also provided.*96kHz Qu models only

The DT168 is a rugged, 96kHz portable expander for adding remote I/O to a Dante equipped dLive, Avantis, SQ, Qu, or AHM system.16 Mic Preamps+60dB of gain, Phantom Power indicators and -20dB pad for line level sources.8 Line OutsBalanced, relay protected line outputs on XLR.On Stage or In The RackStagebox format with optional rackmount kit available.96kHz Dante SupportChoose between standard 48kHz operation and high-fidelity 96kHz operation.Roadworthy Dante ExpansionThe DT168 provides 16 microphone preamps and 8 line outputs in a convenient stagebox form factor. Ideal for portable applications thanks to its rubber bumpers and handle, it can be deployed on stage or used as a drop-in expander in any Qu, SQ, Avantis, AHM, or dLive Dante network.Up to 32 units can be added to a Dante-equipped AHM, Qu, SQ, Avantis or dLive system.Get the Best Out of Your Dante NetworkThe quality of your Dante audio is only as good as the quality of your Dante I/O.DT168 offers the acclaimed Allen & Heath preamps, partnered with 96kHz converters, for best-in-class sound quality over Dante, plus Primary and Secondary ports for daisy-chain or redundancy through secure EtherCon connectors.Ready for the StageThe Expander’s rugged design, with hard-wearing rubber bumpers, allows it to be placed directly on the stage floor during performances. Weighing in at just 4.8kg and featuring a sturdy carry handle, the DT168 offers the convenience and portability needed in rental, education, houses of worship and many other environments. An optional 4U rack mounting kit is available which allows installation in 19-inch racks.DT Preamp ControlDT Preamp Control is a Windows / macOS application that allows remote control of multiple DT168 or DT164-W Dante expanders. Control of analogue gain, phantom power and Pad is provided per socket. The socket names are also displayed and can be edited in Dante Controller.DT Preamp Control extends the applications of the DT168 and DT164-W expanders, not limited to Allen & Heath mixing systems or matrix processors. These include large distributed audio networks in venues, stadia and educational campuses, where high-channel count Dante I/O is required in multiple locations.DT168 CompatibilityUp to 32 DT168 expanders can be added to an AHM, SQ, Avantis or dLive system when equipped with an SQ Dante or dLive 96kHz Dante card, or directly to a Dante-equipped Qu mixer. The DT168 can also be used on Dante-equipped 3rd-party mixers in conjunction with the DT Preamp Control software.

The DX168 is a rugged, 96kHz portable expander for adding remote I/O to a dLive, Avantis, SQ, or Qu* system, or to AHM audio matrix processors.16 Mic Preamps+60dB of gain, Phantom Power indicators and -20dB pad for line level sources.8 Line OutsBalanced, relay protected line outputs on XLR.On Stage or In The RackRugged stagebox format with optional rackmount kit available.Plug-and-PlayNo configuration required, just connect to your mixer and you’re ready to go. Firmware updates are handled automatically by the mixer.Ready for the StageThe Expander’s rugged design, with hard-wearing rubber bumpers, allows it to be placed directly on the stage floor during performances. Weighing in at just 4.8kg and featuring a sturdy carry handle, the DX168 offers the convenience and portability needed in rental, education, houses of worship and many other environments. An optional 4U rack mounting kit is available which allows installation in 19-inch racks.Put It Where You Need ItThe DX168 can be placed up to 100m away from the mixer for maximum flexibility of positioning. The expander connects via a single Cat5e cable to the mixer or upstream DX Expander via a secure EtherCon port. A second locking EtherCon port is provided for redundant connection to compatible hardware, or for daisy-chaining to a downstream DX Expander for additional remote I/O.*96kHz Qu models only

AR2412 is a 48kHz, 24 XLR input, 12 XLR output AudioRack, compatible with Qu, Avantis and SQ mixers, and with the AHM audio matrix processors.24 Mic Preamps+60dB of gain with -20dB pad for line level sources.12 Line OutsBalanced, relay protected line outputs on XLR.Expander & Monitor PortsDedicated ports for connection to an AR84 or AB168, and to the ME Personal Mixing System.Plug-and-PlayNo configuration required, just connect to your mixer and you’re ready to go. Firmware updates are handled automatically by the mixer.Put It Where You Need ItThe AR2412 can be placed up to 100m away from the mixer for maximum flexibility of positioning and includes rack ears for mounting in a 3U 19″ rack space.The unit connects over a single Cat5 cable to the mixer or upstream Expander. A second port is provided for daisy-chaining to another compatible expander or for connection to a ME personal mixing system.

DX012 provides remote output expansion for Qu*, SQ, Avantis and dLive mixers, and for AHM audio matrix processors.12 XLR OutsFlexible switching options between balanced, relay protected analogue and stereo AES digital on outputs 5-12.AES CompatibleAES outputs globally switchable between 44.1kHz,48kHz, 88.2kHz or 96kHz.Redundant & Cascade ModesRedundant mode supports dual-cable connection to compatible hardware. Cascade mode allows daisy-chaining of up to 2 DX Expanders on each DX port.Plug-and-PlayNo configuration required, just connect to your mixer and you’re ready to go. Firmware updates are handled automatically by the mixer.Need to get more out of your system?Perfect for feeding IEM systems and amplifier racks, DX012 offers both analogue and AES digital output options in a compact 1U form factor.Put It Where You Need ItThe DX012 can be placed up to 100m away from the mixer for maximum flexibility of positioning and features integrated rack-ears for mounting in a 1U 19″ space. The expander connects via a single Cat5e cable to the mixer or upstream DX Expander via a secure EtherCon port. A second locking EtherCon port is provided for redundant connection to compatible hardware, or for daisy-chaining to a downstream DX Expander for additional remote I/O.Flexible Output OptionsThe DX012 provides 12 XLR outputs, with three configuration options:12 analogue line outputs8 analogue line outputs + 4 stereo AES outputs4 analogue line outputs + 8 stereo AES outputs*96kHz Qu models only

The DX88 provides 8 inputs and 8 outputs on Phoenix / Euroblock connectors for fixed installations and is an easy way to add local or remote expansion to AHM Audio Matrix Processors.8 Ins + OutsEight mic/line inputs with +60dB of gain, phantom power and -20dB pad, and eight line outputs, all on Phoenix/Euroblock connectors.RackmountableA rackmount kit is available for installing two DX88 expanders together. DX88 can also be installed alongside a GPIO or DX Hub with an additional kit.Cascade ModeCascade mode allows daisy-chaining of up to 2 DX Expanders on each DX port.Plug-and-PlayNo configuration required, just connect to your mixer and you’re ready to go. Firmware updates are handled automatically by the mixer.Easily Add Phoenix / Euroblock Inputs and Outputs via a DX ConnectionDX88 is a 96kHz DX expander enabling convenient placement of 8 mic/line inputs and 8 line outputs – via standard Phoenix / Euroblock connectors – wherever you need to get additional analogue audio in and out of a fixed install.Put It Where You Need ItThe DX88-P can be placed up to 100m away from the mixer for maximum flexibility of positioning.The expander connects via a single Cat5e cable to the mixer or upstream DX Expander via the DX A port. A second RJ45 port, DX B, is provided for daisy-chaining to a downstream DX Expander for additional remote I/O.Rack Mount KitAn optional rack mount kit is available for installation of up to two DX88-P units in a 1U 19″ slot to interface with analogue equipment such as an AV switcher.The DX88-P can also be rack mounted alongside a DX Hub or GPIO module by combining the optional rack kit with the DX Hub / GPIO rack kit.

Massively expand your dLive or Avantis system I/O with DX Link.Easy I/O ExpansionAdd up to 128 remote inputs and 64 remote outputs per DX Link module.Plug-and-Play OperationNo configuration required, just install the card, connect your choice of DX Expander(s) and patch your audio.Parallel ModeIn Parallel mode, 1 DX32 or up to 2 DX168/DX012/DX164-W expanders can be connected to each DX Link port.Redundant ModeIn Redundant mode, 1 DX expander of any kind can be connected to each pair of DX Link ports using 2 cables for redundant connection.Add The I/O You NeedMultiple DX Link cards can be fitted to an Avantis or dLive system to scale up system I/O to meet your requirements.The card provides 4 DX Link ports, each carrying 32×32 channels of 96kHz audio, that can be used to connect to DX expander units in either Parallel or Redundant mode.DX ExpandersDX Link supports our entire range of DX remote expanders.